USRobotics NETServer/16 Manual do Utilizador descarregar pdf (Página 141)

Administrative Tools 9-7

The second line contains the following information:

Broadcast The Ethernet broadcast address.

Dest Displays the IP address of the device on the

other end of a point-to-point connection.

Inet The interface’s IP address (NETServer em-

ploys its LAN port IP address for most

connections).

IPXframe The IPX frame type or protocol.

IPXnet The IPX network address of the frame type

MTU The maximum transmission unit of the

interface.

Netmask The IP subnet mask the interface is currently

using.

When you issue the command, what you see might look some-

thing like this:

net0: flags=1016[IP_UP,IPX_UP,BROADCAST]

inet 192.77.206.57 netmask ffffff00 broadcast 192.77.206.255

ipxnet 0AE31E03 ipxframe ETHERNET_802.3 mtu 1500

Changing An Active Interface

To change an active interface, use the following command:

ifconfig <interface> <option> <new setting>

<interface> can be Net0, ptp1, ptp2 etc. However, the point-to-

point connections must be established in order to be

configurable.

For example, to change the Netmask setting of an established

connection on S1 (point-to-point1) as it is being used for a

hardwired connection, you would use the following command:

ifconfig ptp1 netmask 255.255.255.0

1 2 ... 136 137 138 139 140 141 142 143 144 145 146 ... 283 284

Sem comentários

USRobotics NETServer/16 Manual do Utilizador Página 141